En中文
Case Study

案例分享

wanhua_03.jpgProject Case Study - Yantai Wanhua Group


Project Background

Wanhua Chemical Group Co., Ltd. (hereinafter referred to as “Wanhua Group”), formerly known as Yantai Wanhua Polyurethane Co., Ltd., was established on December 20, 1998. Since 2003, Yantai Wanhua Group and Butler have completed jointly 8 projects with a total area of 122,735 square meters.


Project Overview

Project Name:Yantai Wanhua Group

Project Location:Yantai, Shandong, China

Project Size:81,000 m2 , total 51 buildings

Yantai Wanhua Project Stage I: 31,000 m2

Yantai Wanhua Project Stage II: 15,500 m2

Yantai Wanhua Project Stage III: 14,954 m2

Yantai Wanhua Project Stage IV: 25,000 m2

End Use:Manufacturing Plant and Warehouse

Products:MR-24® Roof SystemShadowrib® Wall System

Signed in:October 2012

Completed in:April 2015
 



Design and Construction Difficulties

Incomplete original design:This project has many small individual buildings, some of which lack construction drawings and require close cooperation between the structural design of Butler and the architectural design of the design institute.

Varied schedule of construction plan: Each individual building has anfractuous pipelines. Some individual buildings have many changes in design and require temporary on-site modifications, which influences the construction of buildings.

Difficult on-site coordination:Individual buildings of the project which Butler is responsible for are distributed in multiple areas of the Wanhua Industrial Park, involving 9 project management departments. Different ways of management are employed for all these project management departments, therefore a large number of counterpart personnel are concerned and multi-coordination is needed for materials transportation.

wanhua_04.png