中文En
Roof
Systems

屋面系统

  •                                    

    图片1.jpg                                    

                                       

                                       

    <                                >

    MR-24® Roof System

    MR-24®屋面系统

    Base material: ZINCALUME®AZ165 steel  or Clean COLORBOND® XRW / XPD steel.

    The first and best standing seam roof system.

    A 360 degree Pittsburgh double-lock seam creates the tightest seam available today to protect against leaks.

    A factory-applied sealant inside the seam assures weather tightness in even the most unforgiving conditions.

    Exclusive roof clip allows roof movement.

    Factory pre-punched panels and structural members to assure proper fit and alignment.

    High strength, substantial Butler specified fastener has twice the pullout strength of industry standard self-drillers.

    BUTLER LITE-PANL® provides natural bright lighting and low maintenance, and won't turn yellow or brittle.

    Butler approved roof curb and opening is fully engineered at the factory, concealing fasteners within the curb and eliminating leaks.

    The roof is certified by FM and UL.

    The roof system carries the highest wind uplift rating (Class 90) awarded by Underwriters Laboratories (UL). And it is fully tested and approved by FM Global as a Class 1 Panel Roof, and construction meeting windstorm classification 1-60 through 1-135 are available.

    * ZINCALUME® steel and Clean COLORBOND® steel can provide excellent corrosion resistance warranty up to 20 years. The product life depends on the environment and activities inside building.
  •                                    

                                       

                                       

    <                                >

    BUTLERIB® II Roof System

    BUTLERIB® II 屋面系统

    Base material: ZINCALUME® AZ165 steel  or Clean COLORBOND®  XRW / XPD steel.

    Factory pre-punched panels and structural members assure proper fit and alignment.

    Slotted holes allow the roof panels to move with thermal expansion and contraction forces without tearing holes in the panels at fastener locations but sealed against leak.

    Its "return leg" provides extra support at the panel side laps.

    Strong fasteners offer twice the pullout strength of common self-drilling screws.

    A special sealant groove is provided to assure BUTLERIB® sealant is applied at the proper location.

    The butyl sealant remains pliable to help keep your roof weather tight.

    A deep 38mm corrugation makes the BUTLERIB® II roof panel one of the strongest standard. 。

    The roof system is available with a U.L. Class 90 wind uplift rating or FM Class 1-90 rating.

    * ZINCALUME® steel and Clean COLORBOND® steel can provide excellent corrosion resistance warranty up to 20 years. The product life depends on the environment and activities inside building.
  •                            

                                       

                                       

    <                                >

    TMR-24 Roof System

    TMR-24屋面系统

    Meet all the performance standards found in the MR-24® roof system.

    Add an interior steel liner to MR-24® roof  system to protect the insulation, give the buildings interior a finished look and help promote excellent energy savings.